7
3.
To start the DR-135 Data Editor, at the DOS prompt, type:
DR135.EXE
DR135.EXE
DR135.EXE
DR135.EXE
or,
DR135
DR135
DR135
DR135
The main menu will appear.
Note:
• To exit the Data Editor, press the F2 key, select the “Quite Editor (Q)”
option, and type Y.
3.3 Setting the Channel Data (Main Menu)
On the main menu, you can set the parameters for each channel. To move the
cursor between the fields, use the cursor keys. To select an option in each field,
press the space bar. To enter a numeric value, use the numeric keys. A
detailed description of the fieIds are listed on the next page.
Note:
• This software supports the context-sensitive help. Press the F1 key to
obtain the information about the field where the cursor is placed.
Ch:
Select the desired channel (from 0 through 99), PL, PH, CALL(C),
and VFO(V) by using the
up
or
down cursor
keys
．
Name:
Write an alphanumeric name instead of the CH No.
Press the
Enter
key to go to input mode. Input the name using the
keyboard, and press the
Enter
key to set the name.
Ref:
Set the channel step for the frequency to be set using CH Data
Editor.
Summary of Contents for DR-135
Page 19: ...17 ...
