11
Note:
• To exit the Data Editor, press the F2 key, select the “Quite Editor (Q)”
option, and type Y.
2.
Setting the Channel Data(Main Menu)for Trunking
Only following items can be programmed in Data Editor (Trunking mode).
CH Data Edtor Version 1.00 Trunking Mode
BANK-Ch:
Select the desired channel (from 1-01 through 1-16), (from 2-01
through 2-16) (from 3-01 through 3-16), (from 4-01 through 4-
16), (from 5-01 through 5-16) and (from C-01 through C-16) by
using the
up
or
down cursor
keys.
Name:
Write an alphanumeric name instead of the CH No.
Press the
Enter
key to go to input mode. Input the name using
the keyboard, and press the
Enter
key to set the name.
Ref:
Set the channel step for the frequency to be set using CH Data
Editor.
Rx Freq:
Set the reception frequency.
W/N:
Select the operating mode Wide/Narrow.
Tx Freq:
Set the reception frequency.
CTCSS ENC:
Set the CTCSS encoder frequency. Use the
Space
key to select
CTCSS - off.
Press the
Enter
key from the selected mode to open the
“CTCSS tone selection screen”.
Summary of Contents for DR-135
Page 19: ...17 ...
