Professional
FM Transceiver
49
LCD Backlight operation
Always lit, turned off and automatic are available as LCD illumination operation
mode.
1.Press and hold
【
PF2
】
key while turning on the radio, and keep pressing
【
PF2
】
key for 3 seconds to enter into the Set Mode operations.
2.Press
【
B
】
/
【
C
】
key to choose the Menu 9 and display “
LIGHT
”.
3.Press
【
A
】
key then press
【
B
】
key or
【
C
】
key to choose the parameter.
AUTO:
Automatic, turns on and off automatically. Default is AUTO.
SET MODE OPERATIONS
Battery Save
This function prevents useless battery consumption by switching the power ON/OFF at a fixed ratio if
there is no key operation or receiving signal for a continuous period of 5 seconds or more. Higher OFF
time (1:4 setting) saves more amount of battery but may cause slight delay on receiving. The Battery
Save function is temporarily suspended when a key is operated or a signal is received. The display
remain unchanged even the BS function is in the OFF cycle.
1.Press and hold
【
PF2
】
key while turning on the radio, and keep pressing
【
PF2
】
key for 3 seconds to enter into the Set Mode operations.
2.Press
【
B
】
/
【
C
】
key to choose the Menu 8 and display “
SAVE
”.
3.Press
【
A
】
key then press
【
B
】
key or
【
C
】
key to choose the parameter from
3 ratios.1:1 / 1:2 / 1:4
OFF:
Battery saving is disabled. Not recommended for normal operations. Default setting is 1:2.
Summary of Contents for DJ-A10
Page 3: ......
