Alinco DJ-162ED, Service Manual

Page: 2 / 23

■ SPECIFICATIONS
■ General
Frequency Range.................................. DJ-162TD 144.00 — 148.00MHz
DJ-162ED 144.00 — 146.00MHz
Emission Type....................................... 16F3
Antenna Impedance...............................50 OHMS
Operating Voltage.................................. Rated 7.2V
Operating Current................................. High (2W) : 1A
Low (Q2W): 500mA
Dimensions........................................... 142(H) x57(W) x 32(D)mm
Weight..................................................Approx. 350g
■ Receiver
Type.................................................... Superheterodyne, Double Conversion
1st IF: 55.05MHz 2nd IF: 455kHz
Sensitivity.............................................. 12dB SI NAD less than -15dB/t
Selectivity.............................................. More than ±7.5kHzat -6dB
Less than ± 15kHz at -60dB
IF......................................................... 1st IF: 55.05MHz 2nd IF: 455kHz
Audio Output......................................... More than 250mW (10% THD), 8 ohms
■ Transmitter
Output Power........................................ See table
Modulation............................................ Variable reactance FM
Maximum Deviation................................ ±5kHz
Harmonic Suppression........................... -60dB
Microphone.......................................... Built-in electret condenser
RF Power Output Table
Hi Lo
with Battery Pack EBP-10NA (7.2V) 2W Approx. x 0.2W
with Battery Pack EBP-12NA (12V)
■5W Approx. x0.5W
with Dry Cell Battery Pack (9V) 3W Approx. x 0.3W
Specifications subject to change without notice.