¨Æ
6
STEP 6
闽超祇甮竟筿方
ｘ
丁ぃㄏノ
叫盢换北竟筿
Т到玂恨
Turn off the transmitter. If transmitter is not
to be used for a long duration, please remove
the battery for storage.
If transmitter is not to be used
for a long duration, please
remove the battery for storage.
ｘ
丁ぃㄏノ
叫盢换北竟筿
Т到玂恨
16
ON/OFF
¹·¶Ã
¦ ¼ ¦
M424 V2
In advance mode, M424 V2 is more aerobatic with faster response, suitable for advanced pilots.
In standard mode, M424 V2 has more mellow control response, suitable for beginner pilots.
Quadcopter contains two flight modes; advance mode and standard mode.
¨º¼¦¬³¹»±¾¤·±¨¤´¡¤¦¥°¦¤¦¤²¡¨¦¶¾®¡¦¼¦·¦¹³ª¤°§¼¦¡
Li-Polymer battery
¾»¹¦
3.7V 530mAh/20C
µ§ ¦®¡½±¥¶ ¦¾¹¦¦¥¨¤¡½¾¦
¨¦²º¡¥§³¦¿¾¡
Remove the
battery safely at the
conclusion of flight. This should be made
into a post flight habit to avoid unforeseeable
problems.
quadcopter
¹¦¥¨¤¡±¾ ¹¦¹©¹¦·Ã¡¬¦³¦
°¤¿¿ª¦À¡
Warning: If left connected in the helicopter
for long duration, the battery may be
damaged due to over- discharge, or even
become fire hazards.
Ä §
WARNING
¨Æ
5
STEP 5
¹¦¥¨¤¡±¾ ¹¦º²¦·Ã»±¾¡¬¦
³¦°¤¿¿ª¦À¡
Warning: If the AA batteries are left in the
transmitter, potential leakage could occur
which may damage the transmitter, and
create fire hazards.
Ä
§
WARNING
MODE 1
MODE 2
¤·±©¦³§
5
¬¡
keep elevator at lowest position for 5 seconds.
Fast flashing of LED
LED
¿§³°Ã
SWITCHING OF FLIGHT MODES
¦¼¦ª¤´
ªª««³§Â¡µ«¤·±©¨³§°¯
5
¬¡±µ
¤ª
¿·§³°Ã¡©¶
§§¦¦¼¦ª¤´¡
M424 V2 LED
¤·±
Keep throttle at lowest point, then keep elevator at lowest position for 5 seconds. The LED on M424 V2 will flash
rapidly. Release the elevator stick to complete switching of flight mode.
M424 V2
¥¶¦¾¨³¨º¦¼¦¡¤°§¼¦»¤°§¼¦¡
¦¤°§¼¦¡
M424 V2
ª¦°§¶¸¤¡¤À¸§¡¾¦¶¶ª®¨¥¡
¦¤°§¼¦¡
M424 V2
ª¦°§¶¸¤¡¤À¸º¡¾¦ª¶¤ªª®¨¥¡
The two flight modes is switched through elevator stick following the method below.
Flight mode defaults to standard mode during power up.
MODE 3
16 FLIGHT MODES
.
