12.SWITCHING BETWEEN MODE 1/MODE 2/MODE 3 ON TRANSMITTER
»±¾
MODE 1 / MODE 2 / MODE 3
ª¤´
¨¬¦°¤³¤¨¥
MODE 1
ª¾±¼¦¡§ªª·±¦©¥¤Ãª¦¸¡¼¬¦°«°¦
MODE 2
¾±¼¦¡§ªª·±¦©¥¤Ã¡¦
MODE3
ªª·±»
MODE1
¦¼¦©¥¤Ã¡¦¤¦²»°Á·±¦¸»
MODE1
¬¤¡½±¿¾¦¤²º©®©¾²»¾±ª¼¦¨¾§ªª¾¡
MODE 1
MODE 2
Elevator
¤²
Throttle
ªª
Rudder
¤¦²
Aileron
°Á
Throttle
ªª
Elevator
¤²
Rudder
¤¦²
Aileron
°Á
MODE1 is commonly used in Asia where throttle stick is on the right hand side, where MODE2 (throttle stick on left side) is more
common amongst western countries. MODE 3 is same as MODE 1 with throttle stick on the right hand side but the position of AIL
and RUD are reversed. Please set the transmitter MODE based on your preference.
¼ ¥¼ ® ¡ ¤¬ ±±¼ ¦ ³ ©¦ ¤¡ ¦ ª ±» §´ ¨¥¼ ¦ ½ ¨·¤¦ ¤¦ ¶ ¦ §´ ¡
The control stick mode has been set at the factory. For switching to other modes, please follow instructions below.
Note: Amongst the 4 axis of the transmitter control sticks, the axis that does not spring back to center is the throttle stick.
µ¡·±ª¥ ¤¦¤¡¤·¦°¼¦¤¶¦¸´¬±¨ªªª·±
10
Throttle trim
ªª·½Á
Rudder trim
¤¦²·½Á
Aileron trim
°Á·½Á
Elevator trim
¤²·½Á
Throttle trim
ªª·½Á
Rudder trim
¤¦²·½Á
Aileron trim
°Á·½Á
Elevator trim
¤²·½Á
ª ·
CAUTION
ª·Å¥
MODE 2
¶¾®
"
¹
"
¤µ
Display panel shows MODE 2, and a
short beep is emitted during power up.
MODE 3
Elevator
¤ ²
Throttle
ªª
Rudder
¤¦²
Aileron
°Á
Rudder trim
¤¦²·½Á
Aileron trim
°Á·½Á
Elevator trim
¤ ²·½Á
Throttle trim
ªª·½Á
ª
MODE 1 / MODE 2
¬¤Å¥¡¶¾®
"
¹
"
¤ª
Transmitter will emitted a long beep during power up.
However, both MODE1 and MODE2 will not be indicate
on the transmitter screen.
ª·Å¥
MODE 1
¶¾®
"
¹
"
¤µ
Display panel shows MODE 1, and a
short beep is emitted during power up.
