5
Foot Strap installation:
1) Separate the strap in to 2 parts. Taking one half of the strap, thread the nylon loop through the eyelet on the re-
former frame under the jump board (Fig. 16)
2) Now pass the foot strap through the loop and pull tight (Fig. 17)
3) Repeat this process for the other half of the strap (Fig. 18) and finally re-thread the strap through the
D-ring (Fig. 19) and the strap is ready to use (Fig.20).
Attaching the Ropes to the Reformer & Adjusting Rope Length
The A2RII includes our Pro Rope Adjusters
which allow you to easily & quickly change
the rope length of an individual rope, or
both together, to offer maximum versatility
and convenience.
Simply pull down the cam lever and slide
the rope forward or backward to the desired
length and then release the cam. The Pro
Rope Adjuster means you can get the
perfect setup every time for any person,
allowing you to completely focus on your
own or your client’s repertoire.
Adjusting the Rope Pull Height
The rope pull height can be adjusted by
loosening the rope height adjustment knob
(Fig. 23) and then pulling the knob outwards
(Fig.24). Slide to the desired height and ensure
the pin engages in one of the holes, then
tighten the knob to prevent rattle.
Fig. 14
Fig. 15
Fig.16
Fig.17
Fig.18
Fig.19
Fig.20
Fig.23
Fig.24
Fig.21
Fig.22
