Aligator Owners Operator Manual
4
Electrode Current & Alarm
The first normal and default display is as follows:
Current:
82mA OK
Current Alarm:
ON
Actual current into the electrodes will be displayed, dependant upon your pool setting.
Should the “OK” be replaced by “LOW” or “HIGH” the alarm will be activated, the red LED
will flash and the unit will “beep” this indicates that either the pool water balance or the
electrodes need attention.
The alarm can be switched off by pushing the bottom right hand button or back on by pushing
the top right hand button.
NOTE: Current Alarm reverts to ON at end of 12 hours
Pool Size Setting
The second display shows what pool size has been selected from the table below, i.e. the size
of your pool, for example:-
POOL Ltrs
9-27000
SIZE Gals
2-6000
The Top right hand button increases Pool Size from size 1 to 6.
The Bottom right hand button decreases Pool Size from size 6 to 1
The Alternative options are shown below for various pool sizes.
On Hours for 12 Hour period
LCD Display
Size
Summer
Winter
9 – 27700’ Ltrs
2 – 6000’ Gals
1
2
1
27 – 50000’ Ltrs
6 – 110000’ Gals
2
3
2
50 – 70000’ Ltrs
11 – 160000’ Gals
3
4
3
70 – 100000’ Ltrs
16 – 22000’ Gals ****
4
5
4
100 – 50000’ Ltrs
22 – 340000’ Gals ****
5
6
5
150 – 200000’ Ltrs
34 – 45000’ Gals ****
6
8
6
NOTE: The large pool sizes noted above as **** requires the larger Aligator unit and cannot
operate with the normal domestic unit.
