56
Figure 2. PTZ Settings Menu
2.
Select channel where PTZ camera is installed next to
Camera
label.
3.
Configure the settings of baud rate, data bit, stop bit, parity, flow control,
PTZ protocol and address.
4.
Click
OK
to save settings and exit the PTZ Settings menu.
Note
: All setting parameters (baud rate, data bit, stop bit, parity, flow control, PTZ
protocol and address) must be consistent with the PTZ camera connected.
9.3 Setting PTZ Presets, Patrols & Patterns
The DVR allows you to program presets, patrols and patterns for a connected PTZ
camera.
Understanding PTZ Controls
The PTZ control panel provides a series of PTZ controls, shown in Figure 3.
Figure 3. PTZ Control Interface
The controls on the PTZ panel include:
1. Directional Pad/Auto-scan Buttons:
Controls the movements and
directions of the PTZ. The center button is also used to start auto-scan of
PTZ.
2. Zoom:
Used to zoom in and out with the PTZ.
3. Focus:
Used to adjust the focus of the PTZ.
4. Iris:
Used to open up or close the iris of the PTZ.
