UPMIDIAS
Replacing the display panel
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
After working inside your computer
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Slide the display cable into the display panel and press down on the latch
to secure the cable.
2
Turn the display panel over.
3
Align the screw holes on the display panel with the screw holes on the
display back-cover.
4
Replace the screws that secure the display panel to the display back-cover.
Post-requisites
1
Follow the procedure from step 2 to step 5 in “Replacing the
”.
2
Replace the
3
Replace the
.
4
Follow the procedure from step 5 to step 11 in “Replacing the
5
Replace the
6
Replace the
.
7
Replace the
.
8
Replace the
.
91
Summary of Contents for 15 R2
Page 55: ...UPMIDIAS 8 Disconnect the interposer from the hard drive 1 interposer 2 hard drive 30...
Page 72: ...UPMIDIAS 5 Lift the touch pad off the palm rest assembly 1 palm rest assembly 2 touch pad 47...
Page 159: ...UPMIDIAS 4 Lift the battery off the computer base 1 screws 2 2 battery 3 computer base 134...
Page 162: ...UPMIDIAS 1 computer base 137...
