UPMIDIAS
Replacing the display bezel
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
After working inside your computer
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1
Follow the procedure from step 1 to step 2 in “Replacing the
”.
2
Connect the logo-board cable to the logo board and secure it with the
adhesive tape.
3
Slide the display-board cables into the logo board and press down on the
latches to secure the cables.
4
Carefully turn the display bezel over.
5
Align the display bezel with the display back-cover and gently snap the
display bezel into place.
Post-requisites
1
Replace the
2
Replace the
.
3
Follow the procedure from step 5 to step 11 in “Replacing the
4
Replace the
5
Replace the
.
6
Replace the
.
7
Replace the
.
87
Summary of Contents for 15 R2
Page 55: ...UPMIDIAS 8 Disconnect the interposer from the hard drive 1 interposer 2 hard drive 30...
Page 72: ...UPMIDIAS 5 Lift the touch pad off the palm rest assembly 1 palm rest assembly 2 touch pad 47...
Page 159: ...UPMIDIAS 4 Lift the battery off the computer base 1 screws 2 2 battery 3 computer base 134...
Page 162: ...UPMIDIAS 1 computer base 137...
