2
Version 1.01
Warnings
Please note: The registration and subsequent use of the Product
constitutes acceptance by the user of the license and warranty
terms contained in the section Hardware Warranty and
Software License (page
38
and following).
Important notices about the use of the KESSv2 tool
To avoid electrical shock, do not open the case when the tool is connected. Refer
any required servicing of product to Alientech Srl only.
The product and its accessories are suitable for professional use only.
This product is intended only for the tuning of vehicles for competitions or to be used on closed
circuit not open to public.
The product allows having access to operating engine management parameters: the
subsequent modification of these parameters may make the vehicle not in line with the
requirements and standards of your Country about power, speed and emissions. It may also
cause a different or greater wear and tear of mechanical and electrical components of the
vehicle and could void the warranty provided by the manufacturer/sellers of the vehicle.
Alientech Srl, its subsidiaries and affiliates make no warranties of any kind about any extra wear
or deterioration of the engine or other electrical or mechanical parts of the vehicle or as to the
compliance with exhaust emission standards and regulations required by your Country
.
The tool and its accessories shall be used only after a thorough reading of this guide and the
Operating Manuals dedicated to the several protocols, and only in compliance with guidelines
and suggestions.
The product may enable modifying the operation of the vehicle; therefore, the vehicle may
have different reactions when compared to standard conditions specified by the manufacturer.
The greatest attention must be paid when driving a vehicle which has its engine parameters
modified.
The use of the KESSv2 and the K-Suite software must always happen with the car parked
stationary and engine off. In the event that the software expressly asks for ignition of the
engine, make sure that the handbrake is engaged and the transmission is in neutral position.