EN
alicesgarden.fr
alicesgarden.es
38
A
B
8
6
3
4
7
5
Position the legs opposite the connec-
tors.
Fit the leg extensions №6 to the U-legs,
then fasten them together using bolt
№12 (except Ø244cm).
Screw in the T connectors in order to ob-
tain a circle frame.
Place end B in the V-rings of the jumping
mat.
With the help of several people, lift
the structure and fit the legs into the
connectors.
Position the springs on the frame, with end
A of the spring in the frame (see picture 8).
Important note : all of the springs must be installed on the circular frame from
above. Both hooks of springs A & B must be placed in a downward position. En-
sure that one spring is installed in all of the notches. If one or several springs
are missing, this can cause instability or a tear and is therefore dangerous!
