56
SECTION 5: OSD MENU REFERENCE
Diagnostics page 1
Diagnostics page 2
5.3.6 Set Motion parameters
The MOTION PARAMETER submenu is used to configure how the camera will move from one surveillance target to another. Some
features include:
•
AUTO FLIP
: In manual tracking mode, when a target object moves directly beneath the camera, the camera automatically
rotates 90 degrees horizontally (flips) for tracking. The default setting of AUTO-FLIP is ON for this camera model.
•
DOME SPEED
: Dome speed sets the manual movement speed of the camera. Dome speed is adjustable from 1 .. 10.
•
IMAGE FREEZE
: This feature enables the live view to switch directly from one scene defined by a preset to another, without
showing the middle areas between these two to improve the surveillance efficiency.
•
LIMIT STOP
s: The camera can be programmed to move within the configurable limit stops (left/right, up/down).
•
PARK ACT
ion: The action the camera will automatically perform after a pre-defined period (PARK TIME) of inactivity.
•
PRESET SPEED
: the speed of calling a preset can be set from level 1 to 8. The higher levels will call a preset faster.
•
PROPORTIONAL PAN
ning: When this function is enabled, the pan/tilt speed changes according to the amount of zoom. If
using high zoom, the pan/tilt speed is slowed to keep the image from moving too fast on the live view display. You can set
PROPORTIONAL PAN to ON or OFF to enable/disable the function. This function is enabled automatically while setting patterns.
•
SCAN SPEED
: Scan speed defines the scan degree per second of a panning scan, tilting scan, frame scan, random scan and
panoramic scan. Scan speed is adjustable from 1 to 40 degrees per second.
To configure
MOTION
settings:
1.
Open the
MOTION PARAMETER
submenu from the
OSD | DOME SETTINGS
menu.
Summary of Contents for ALI-PTZ30XR
Page 8: ...viii NOTES...
