15
ALI-NS8014VR IP PTZ Camera Installation and Setup Guide
SECTION 2: INSTALLATION
7. Route LAN, power, and accessory extension cables to the installation location. These cables can be routed through the base of
the wall mount bracket and brought through to the flange adapter. See “2.6 Connecting drop cables” on page 18 for more
information.
8. Attach the safety cable to the camera base. A hole in the base is provided for the safety cable screw. Attach the other end of
the cable to the wall mount bracket. The camera should hang freely on the wall mount bracket.
9. Connect the LAN, power and accessory extension cables to camera drop cable, as needed. Protect all connections from
contamination.
CAUTION
Failure of this product due to contamination of drop cable connections is considered an installation error, and voids the
warranty of the product.
10. While storing extra cable in the flange adapter above the adapter plate, position the camera on the adapter plate such that
the three raised screw heads (see below) in the camera base fit into the three slots in the plate, and then rotate the camera
clockwise to fully seat the screw heads in the slots.
Align raised screw
heads (3) with slots on
the adapter plate
Adapter plate
lock screw
11. Tighten the adapter plate lock screw. See photos above. The lock screw should connect to the tab on the adapter plate.
12. Twist the camera base clockwise and counter clockwise to ensure it is securely locked onto the adapter plate.
13. Continue installation with “SECTION 3 Configure Network Access” on page 21.
Summary of Contents for ALI-NS8014VR
Page 6: ...vi NOTES...
