13
ALI-NS8014VR IP PTZ Camera Installation and Setup Guide
10. Tighten the adapter plate lock screw. See photos above. The lock screw should connect to the tab on the adapter plate.
11. Twist the camera base clockwise and counter clockwise to ensure it is securely locked onto the adapter plate.
12. Continue installation with “SECTION 3 Configure Network Access” on page 21.
2.4 Wall mount installation
The ALI-NS8014VR camera can be mounted onto a wall using the ALI-AF10 Wall Mount Bracket with Flange Adapter. The ALI-AF10
bracket, when used for an outdoor installation, provides additional shielding of the camera base and connectors from rain and
snow.
1. Determine how the camera will be powered. The camera can be powered through the Ethernet cable with PoE, or with the
12 Vdc power adapter provided.
2. Determine the best location for installing the PTZ camera. Make sure the mounting surface is strong enough to withstand the
wall mount bracket assembly plus at least 8 times the weight of the camera.
3. Route LAN, power, and accessory extension cables to the installation location.
4. Install the wall mount bracket using the installation instructions provided. Normally the LAN, power and accessory extension
cables are routed through the bracket before anchoring the bracket to the wall, but can be routed through the side of the
flange.
5. In the photo below, notice how the camera locks onto the adapter plate. Loosen the adapter plate lock screw on the side of the
camera base, and then remove the adapter plate from the camera by turning it counter-clockwise.
SECTION 2: INSTALLATION
Summary of Contents for ALI-NS8014VR
Page 6: ...vi NOTES...
