ALIBI ALI-NS7012R, Installation Manual

Page: 17 / 36

11 ALI-NS7012R IP PTZ Camera Installation Guide
5. Screw the pendant adapter onto the end of the mounting bracket. Tighten the set screw to secure the adapter to the bracket.
6. Clip the safety cable to the loop on the camera mounting bracket.
7. Route the camera drop cable through the mounting bracket, then clip the safety cable onto the loop in the mounting bracket.
Drop cable
Pendant
adapter
Align
marks
Safety cable
Coupling
Pendant adapter
Back box
8. Fit the camera coupling into the pendant adapter, then twist the camera to align the marks on the pendant adapter and the
camera back box. See the figure above.
9. Tighten the two lock screws on the pendant adapter to secure the camera to the mounting bracket.
10. Feed the camera drop cable through hole drilled at the mounting location, then anchor the mounting bracket to the wall.
2.4 Ceiling mounting
Following the instructions below to install the camera using the
ALI-PTCL Ceiling Mount Bracket
.
1. Determine the best mounting screws and hardware to anchor the mounting bracket with the camera to the mounting surface.
Use the following guidelines:
—
For cement ceiling mounting, use the expansion screw to anchor the bracket.
—
For wooden ceiling mounting, use self-tapping screw to anchor the bracket.
—
Make sure that the ceiling is strong enough to withstand more than 8 times the weight of the camera and the bracket.
2. Using the mounting bracket as a template, mark the location of the mounting screw holes on the ceiling.
SECTION 2: INSTALLATION