5
www.observint.com
© 2014 Observint Technologies. All rights reserved..
Configurable parameters include:
•
Switch Day and Night
: Select either
Auto-Switch
or
Scheduled-Switch
.
—
If using
Auto-Switch
, open the
Day/Night Switch
submenu to select the Sensitivity,
Filtering Time, and Smart IR feature ON or OFF.
—
If using
Scheduled Switch
, set the
Start Time
and
End Time
of the switch, then open
the
Day/Night Switch
submenu to select the
Smart IR
feature ON or OFF.
Also, click the
Common
,
Day
and
Night
tabs to set the Saturation, Hue, Brightness,
Contrast and Sharpness for Day and for Night modes.
•
Image Adjustment
submenu: Open the Image adjustment submenu to set the Saturation, Hue,
Brightness, Contrast and Sharpness of the video image. Each parameter can be set to a level of 0
~ 100 either by moving the slider or entering the value in the box on the right. The effect of the
adjustment will appear in the Live View image in the menu.
•
Exposure Settings
submenu: In this submenu, set the following for the best performance:
—
Iris Mode
: Select Auto or Manual. Some cameras may not offer both options.
—
Exposure Time
: Value ranges from 1/3 to 1/100,000 s. The nominal value is 1/150. Adjust it
according to the lightening condition.
—
Gain
: Set the gain to show the optimal brightness level.
•
Day/Night Switch
submenu: You can set the Day/Night switch to Day, Night, Auto, or Schedule.
The option you select determines the submenu options.
—
Day
or
Night
: These options both have one parameter: Smart IR.
—
Auto
: If you select Auto switch, you can set the sensitivity (0 .. 7), filtering time and Smart IR.
—
Schedule
: Use Schedule to set that
Start Time
and
End Time
for the switch. Smart IR is
also selectable.
•
Backlight Settings
: Backlight settings include BLC Area (Off, Up, Down Left Right Center), the
area to control, and
WDR
(Wide Dynamic Range) ON or OFF.
•
White Balance
: White Balance selection is used to correct colors in the image depending on the
lighting source. You can also set the white balance manually (MWB), using Automatic White Balance
(AWB1), and lock the white balance setting (Locked WB).
•
Image Enhancement
: Options in this submenu include Digital Noise Reduction (DNR) ON or OFF.
If ON, yo can also adjust the level of noise reduction.
•
Video Adjustment
: Video Adjustment includes:
—
Mirror
: Mirror adjustment enables you to flip the image (Up/Down), flip Left/Right (reflect
or Center).
—
Rotate
: Rotate rotates the image +90 degrees. Rotate and Mirror can be used to adjust the
image in any orientation.
—
Video Standard
: Select 60 Hz for NTSC format.
—
Capture Mode
: To make a complete use of the 16:9 aspect ratio, you can enable the capture
mode when you use the camera in a narrow view scene.
Specifications
Item
Specification
Camera
Image sensor
1/3” CMOS
Scanning mode
Progressive scan
Resolution
Up to 2048 x 1536
Effective pixels
3.0 megapixel (approx.)
Minimum illumination
Color: 0.095 Lux (F1.4)
B/W: 0 Lux (IR ON)
Day/Night
True Day/Night ICR)
Electronic shutter (sec)
1/30 ~ 1/10000 (Auto/Manual)
Gain control
Auto
White Balance mode
Auto
Noise reduction
3D DNR
IR illuminators
Smart IR array, 850 nm
IR array range
100 ft (30 m)
IR Sensitivity
700 - 1100 nm
Lens
Lens Type
Varifocal
Focal Length
2.8 ~ 12 mm
Iris
Auto
Focus
Manual
Horizontal viewing angle
91.2° (wide) ~ 28.3° (tele)
F-number
F1.4
Video
Video compression format
H.264 (main profile), MJPEG
Codec streaming capability
Dual streaming
Frame rate (maximum)
20 fps @ 2048 x 1536, 30 fps @ 1080p
Bit Rate
32 kbps ~ 16 Mbps
Bit Rate Mode
CBR, VBR
Audio
Audio streaming
Two-way
Audio compression format
64 Kbps (G.711) / 16 Kbps (G.726)
Features
Motion detection
Yes
Event notification
Email, FTP
Privacy mask
Yes
Video analytics
Tamper detection
Interface
Ethernet
RJ-45 10/100BASE-T
Audio input
1x In
Audio output
1x Out
Sensor input
1x In
Alarm output
1x Out
SD card slot
1x Micro SD/SDHC/SDXC (up to 64GB)
Video output
1x BNC
Network
Protocols
TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, ICMP, IGMP, SNMP, FTP,
802.1X, QoS, HTTPS, ONVIF, PSIA
Security
Password Protection
Number of connections
Up to 15
General
Power requirements
PoE (IEEE802.3af) / 12 Vdc
Power consumption
5.5 W (IR OFF) / 7.5 W (IR ON)
