Aliaxis FWSG SE, Operating Instruction

Page: 15 / 24

15
2375 ·
Stand/Update: 03.2021
EN
1.2 Designated use
The FWSG SE scraper tools are precision tools and serve for the removal of the
oxide layer as preparation for an electrofusion joint which forms on the surface
of PE pipes during storage. They are ideal for scraping the surface areas of
FRIALEN and FRIAFIT saddle fittings on the pipe and preparing for fitting fusion
at the outlet spigot or end of the pipe.
The service life depends on the frequency of use and the external influences
during use and/or the storage or transport of the tool.
These operating instructions apply in connection with the FRIALEN Safety
Fittings and FRIAFIT Sewage System assembly instructions.
FWSG SE dimension Order no.
FWSG SE 63 d 63 613 562
FWSG SE 75 d 75 613 563
FWSG SE 90 d 90 613 564
FWSG SE 110 d 110 613 565
FWSG SE 125 d 125 613 566
FWSG SE 140 d 140 613 567
FWSG SE 160 d 160 613 568
FWSG SE 180 d 180 613 569
FWSG SE 200 d 200 613 570
FWSG SE 225 d 225 613 571
FWSG SE 250 d 250 613 572
FWSG SE 280 d 280 613 573
FWSG SE 315 d 315 613 574
NOTICE
Before any fusion, a scraping has to be performed in any case!
Leaking fusion joints may result if the oxide layer is not removed completely.