µISP User's Manual
9
2.
Programming Installations
Algocraft’s µISP series finds different applications into the device programming
field: into an on-board programming system for standalone stations or into
automatic test equipment. It can be used for a single programming or for a multi-
device parallel programming using different units.
Stand-alone
–
Manual Programming
Once the programmer is configured, the programming cycle is executed by simply
pressing the START button. The result of the programming is verified by the status
of the multifunction LED (BUSY/PASS/FAIL). µISP can be used as a handheld
instrument in standalone mode for in-field programming.
Stand-alone
–
Automated Programming
After the configuration of the parameters, the programmer can only be controlled
by I/O lines (START, BUSY, PASS/FAIL). The needed signals to control the
instrument in standalone mode are located in the “CONTROL” connector.
Multiple Programming system
By using a simple USB HUB or LAN switch, it is possible to create a parallel
programming system.
