8190S SIP Classroom Speaker with Strobe FW 3.1
Specifications
Power Input:
Type 2 PoE+ IEEE 802.3at (Max 25.5 W)
Idle nominal 5-8 W, depending the clock brightness
For testing purpose only:
PoE can be used. Note that full audio and brightness levels will not be available.
SIP:
Multiple extensions for Page or Alerting
Multicast:
Receive
Audio Codecs:
G.711 A-law, G.711 u-law, G.722, Polycom Group Page
Microphone:
Electret omnidirectional wideband
Audio Delay:
10 to 1000 ms selectable for synchronization
Audio Memory:
1 GByte available
Relay Output:
Normally open, activated when 8190S is in use
Max 30 V 50 mA
Relay Input:
Normally open or normally closed dry contact,
Algo 1202 CallBox, Algo 1203 Wall Switch, EOL termination
Relay Input Current
Draw Detection
Thresholds:
Active
Idle
Tamper
Normally Open
>4mA
<4mA
N/A
Normally Open
with Supervision
>20mA
4-20mA
<4mA
Normally Closed
<4mA
>4mA
N/A
Normally Closed
with supervision
4-20mA
>20mA
<4mA
Nominal 12V source, current limited to 40mA
Typical supervision resistor value = 1k ohm
Configuration:
Web interface or provisioning
Provisioning:
TFTP, FTP, HTTP, HTTPS
Supervision:
SNMP
NAT:
STUN, CRLF Keep Alive
Processor:
Linux OS ARM Cortex-A8 32-Bit RISC Processor
Server Redundancy:
Primary, secondary, tertiary
Environmental:
32 to 104 ºF (0 to + 40 ºC); 10-95% RH non-condensing. Dry
indoor locations only (Contact Algo for options for outdoor
locations)
Compliance:
RoHS, CE, FCC Class A, CSA/UL (USA & Canada)
Document 90-00105
03/09/2020
Page 54
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
