![Algo 8190S User Manual Download Page 12](http://html1.mh-extra.com/html/algo/8190s/8190s_user-manual_2896172012.webp)
8190S SIP Classroom Speaker with Strobe FW 3.1
Features
SIP Paging: One 8190S
The 8190S SIP speaker can be registered as a third-party SIP extension with a hosted or
enterprise Communications Server supporting 3
rd
party SIP endpoints.
To register the speaker with the SIP server, use the
tab in the web
interface to enter the Communication Server IP address, extension, username, and
password. This information will be available from the IT Administrator.
If VLAN is used, navigate to the
Advanced Settings
>
Network
tab to set VLAN options.
Important: once the speaker is using VLAN you will need to be on the same VLAN
to access the web interface.
The speaker may now be accessed by dialing its assigned extension from a telephone,
device, or client. The speaker will auto-answer, play the default WAV pre-announce tone,
and allow voice paging until disconnected.
There are a number of configurable speaker options:
•
Increase or Decrease Speaker Volume
•
Enable AGC (automatic gain control)
•
Enable Ambient Noise Monitoring (speaker volume adapts to background noise)
•
Enable Talkback
•
Customize pre-announce tone WAV file
These are a number of configurable strobe options:
•
Flash pattern
•
Brightness
•
Color 1
The best voice paging quality and intelligibility will be obtained using the G.722 wideband
audio codec. Most current IP telephones support G.722 which is sometimes referred to as
“HD” voice or audio.
SIP Ring Event
Set Monitoring Mode to ‘
Monitor Ring
’ and enter credentials. When a call is made to the
SIP extension the 8190S will play the selected WAV file and flash the pre-configure light
pattern. Often, the 8190S will be part of a hunt group or ring group to ring in conjunction
with a telephone.
Document 90-00105
03/09/2020
Page 12
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792