Algo 8180, User Manual

Page: 51 / 51

- 51 -
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if it is not installed and used in accordance with the instruction
manual, it may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
Important Safety Notice
The 8180 is intended for installation in a dry indoor location with all connected
wiring located within the perimeter of a building.
The 8180 is a Power over Ethernet (PoE) device. The PoE power source must
be a Limited Power Source (LPS), provided by CAT5 UTP cable, and isolated
from mains by minimum reinforced or double insulation. Ensure that the PoE
injector or PoE enabled switch carries safety regulatory approval marks (ie CSA,
UL, CE).
Optional 8180 Accessories
1186 Horn Speaker 1127 Visual Alerter 1128 Strobe Light
algosolutions.com/1186 algosolutions.com/1127 algosolutions.com/1128
Algo Communication Products Ltd.
4500 Beedie Street
Burnaby, BC Canada V5J 5L2
www.algosolutions.com