ALGE-Timing D-LINE Series, Manual

Page: 4 / 20

Manual
D-LINE
1 Operation
1.1 Change the Displaymode
You can change the Displaymode with the internal button or with the PC-Software and the
cable 145-05.
To change the parameters with the internal button you have to press the button as long as
the first parameter appears on the display. If you wait now for a few second the Value of the
parameter starts blinking. You can now always change the parameter or value which is
blinking. To save the changings you need to push through all the parameters.
1.2 Standard-Settings
The D-LINE Scoreboards are delivered with a standard-setting optimized to show the running
time from the Timing-Device.
To reload the Factory settings keep the internal button pressed as long as the Software-
Version appears on the display!
ATTENTION! Only Scoreboards newer than 2005-06 have this function!
1.3 Parameterlist
The parameterlist shall be in a way that the user can already see by the name of the
parameter that he is adjusting the parameter he would like to adjust. On the side there shall
be also a sticker with a short explanation.
ATTENTION! Old D-LINE models have different parameters. These old parameters are
always in [xx]. Some of the settings are identically and some others are not available.
ATTENTION! Since 3-digit-displays doesn’t have the full capability of all the below described
functions there is a different menu for these displays.
You can find these parameters in () behind the normal parameters! Non described
parameters are not available on such displays!
1.3.1 Set daytime hours [P0]
This parameter is to adjust the hours of the daytime
1.3.2 Set daytime minute [P1]
This parameter is to adjust the minutes of the daytime.
1.3.3 Set daytime seconds [P2]
This parameter is to adjust the minutes of the daytime.
1.3.4 Set the day of the date [P3]
This parameter is to adjust the day of the date.
1.3.5 Set the month of the date [P4]
This parameter is to adjust the month of the date.
Page 4