ALGE-Timing BANG2, Manual

Page: 11 / 16

Manual
Speaker System BANG2
-11-
2.7.9 Delay Time False Start Channel “Delaytime false s.“
This setting adjusts the delay time for the selected false start channel in order to avoid bounc-
ing. The setting is also distributed to other WTN devices. 0.1 s is default setting.
Simple pressing on the arrow button changes the delay time in 1/100 s steps. Keeping it
pressed changes the delay time continuously in 1/10 s steps.
2.7.10 “Default“
In case you answer the question “Load default“ with „yes“ and green button, the default settings
are automatically restored.
Exit the menu with “No“ without changes.
2.7.11 Exit Settings “Exit“
Confirming the menu item “Exit” results in displaying the status menu.
2.8 Accessories
ALGE-TIMING
offers the following accessories for
BANG2:
2.8.1 Weather Protection BANG2-BAG
Protection for outdoor use of the BANG2. When rain-
ing or snowing, the BANG2 has to be protected against
wet conditions.
Note:
The old BANG-BAG does not fit to the BANG2.
2.8.2 Tripod BANG-TRI
Tripod for mounting the BANG2
2.8.3 BANG SPK
BANG SPKs are loudspeaker for connecting to the am BANG2. Up to eight BANG
SPKs can be connected. The BANG SPK consists of a passive loudspeaker with
output of approx. 10 W. It has a fixed cable of 12 m (connection to BANG2 or
BANG SPK) and a loudspeaker socket (cinch) for further BANG SPK.