Thank you for choosing one of our Algam Lighting DMX splitters. Please read this user manual carefully and follow the instruc-
tions to avoid danger or damage to the unit due to mishandling. Keep this user guide for future reference.
Please carefully read the instruction, which includes important information about the installation, usage and maintenance,
BEFORE operating this device.
• This device is exclusively meant to be used as a splitter for DMX signals within the limits given in this manual. Using it in any
other way you risk electric shock and warranty will become void.
• Never sever or manipulate the power cord or the plug. If a power cord is provided with an earth lead, this is mandatory to
ensure safe operation! Otherwise a LIFE THREATENING situation exists!
• Unpack and check carefully there is no transportation damage before using the unit. Never put a damaged device into opera-
tion.
• Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit as stated
in this manual.
• The unit is for indoor use only. Use it only in a dry location. Exposing the device to rain or moisture would cause the risk of
electrical shock or fire.
• DO NOT let any liquids or objects enter the unit. Should any liquid be spilled on the unit, DISCONNECT the power supply to
the unit immediately and contact the service company.
• The unit must only be installed in a location with adequate ventilation. Be sure that no ventilation slots are blocked. In order to
guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.
• Disconnect the device from the mains power before any servicing or maintenance.
Notice regarding power disconnection: To disconnect the device from the power source the power plug must be removed from
the power socket. For this reason the device must be placed in a position where a constant unobstructed access to the power
socket is assured, thus in an emergency situation you are able to immediately pull out the power plug. To eliminate the risk of
fire you must completely disconnect the power plug from the power socket after the device has been used.
• Always grasp the power cord by the plug. Do not pull on the cord itself and never touch the power cord with wet hands as this
could result in a short circuit or an electrical shock. Do not place the device, speaker cabinets or anything else on the power
cord and make sure that it does not become clamped.
• Before a storm and/or a thunderstorm with a risk of lightning, disconnect the device from the mains power supply.
• Under no circumstances may you open the device housing. Should you do so your safety would not be assured. There are no
operational components whatsoever inside, only dangerous voltages that can give you a deadly shock!
• NEVER use the unit under the following conditions :> In places subject to vibrations or bumps.> In places with a temperature
of over 45 °C or less than 2 °C.> In places subject to excessive dryness or humidity (ideal conditions are between 35% and
80%).
• Never submerse the device in water or any other liquid. Only wipe it with a slightly damp cloth.
• Never operate the device near flames, flammable, explosive materials, or hot surfaces. Otherwise you run the risk of causing
a fire.
• Never leave this device running unattended.
• This appliance must not be used by individuals (including children) with restricted physical, physiological or intellectual abilities
or deficiencies in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive
from this person instruction in how the appliance is to be used.
• Keep children away from the device and power cord! Children frequently underestimate the dangers of electrical devices. Also
keep the plastic packaging well away from small children. There is a risk of suffocation!
• In the event of serious operating problems, stop using the unit immediately. Never try to dismantle, repair or modify the unit by
yourself. Otherwise warranty becomes void. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance centre.
SAFETY INSTRUCTIONS
