AlfrescoPlus DOUBLE Assembly Instructions Manual Download Page 14

Page: 14 / 16

ALFRESCOPLUS™

Step 2: Install the stone top as per the steps provided

Step 3: Align the sink with the pre cut hole in the stone

top.

Step 4: Lower the sink into the pre cut hole in the stone.

If a permanent installation id required liquid silicone

adhesive may be used under the metal flange of the sink.

Step 5: Place the sink tap into the pre cut hole provided.

Screw the base of the tap into place by screwing from the

bottom of the sink. Your tap will then be securely in

position. Please note a registered plumper is now

required to plum into your water mains.

FIG 23

FIG 24

FIG 25

FIG 26

Step 2: Install the stone top as per the steps provided

Step 3: Align the sink with the pre cut hole in the stone

top.

Step 4: Lower the sink into the pre cut hole in the stone.

If a permanent installation id required liquid silicone

adhesive may be used under the metal flange of the sink.

Step 5: Place the sink tap into the pre cut hole provided.

Screw the base of the tap into place by screwing from the

bottom of the sink. Your tap will then be securely in

position. Please note a registered plumper is now

required to plum into your water mains.

FIG 23

FIG 24

FIG 25

FIG 26

Step 2:

Install the stone top as per the

steps provided

FIG. 24

Step 3:

Align the sink with the pre cut hole

in the stone top.

Step 5:

Place the sink tap into the pre cut

hole provided. Screw the base of the tap
into place by screwing from the bottom of
the sink. Your tap will then be securely in
position. Please note a registered plumper
is now required to plumb into your water
mains.

Step 2: Install the stone top as per the steps provided

Step 3: Align the sink with the pre cut hole in the stone

top.

Step 4: Lower the sink into the pre cut hole in the stone.

If a permanent installation id required liquid silicone

adhesive may be used under the metal flange of the sink.

Step 5: Place the sink tap into the pre cut hole provided.

Screw the base of the tap into place by screwing from the

bottom of the sink. Your tap will then be securely in

position. Please note a registered plumper is now

required to plum into your water mains.

FIG 23

FIG 24

FIG 25

FIG 26

FIG. 23

FIG. 26

Step 2: Install the stone top as per the steps provided

Step 3: Align the sink with the pre cut hole in the stone

top.

Step 4: Lower the sink into the pre cut hole in the stone.

If a permanent installation id required liquid silicone

adhesive may be used under the metal flange of the sink.

Step 5: Place the sink tap into the pre cut hole provided.

Screw the base of the tap into place by screwing from the

bottom of the sink. Your tap will then be securely in

position. Please note a registered plumper is now

required to plum into your water mains.

FIG 23

FIG 24

FIG 25

FIG 26

Step 4:

Lower the sink into the pre cut hole

in the stone. If a permanent installation id
required liquid silicone adhesive may be
used under the metal flange of the sink.

FIG. 25

Summary of Contents for DOUBLE

















Search results

Summary of Contents for DOUBLE

Reviews:

Related manuals for DOUBLE

Brands by name

Popular brands

AlfrescoPlus DOUBLE, Assembly Instructions Manual

Search results

Summary of Contents for DOUBLE

Reviews:

Related manuals for DOUBLE

Brands by name

Popular brands