Alfresco ALXE series, Care And Use Manual

Page: 7 / 32

7
FREE STANDING MODELS:
Complete the following steps:
1. Remove all packaging materials.
2. Ensure that the burners are positioned correctly on their orifices, and are fully seated onto
their supports.
3. Position the briquette trays onto their support ledge.
4. Make the connection to the gas regulator according to the instructions on pages 8 & 10 for
your gas type.
5. Allow a minimum of 3” clearance around all sides of grill cart for proper air movement.
6. Lock the rear casters to prevent unwanted grill movement.
WARNING:
To prevent harm and ensure proper operation of your grill, it is imperative that the burners are properly
installed with respect to the gas orifices. Be certain that the orifice is inserted completely into the
burner’s inlet and that the burner rests firmly on its support bracket.
The burner should not rock side-to-side nor top-to-bottom if properly installed. If excessive burner
movement is present, reseat burner or contact your authorized service provider.
NOTES CONCERNING GFCI USE AND LOCATION:
1. Do not attempt to circumvent using a GFCI receptacle, it is for your safety.
2. Ensure that the GFCI receptacle is located in an easily accessed location.
3. Follow the manufacturer’s instructions for installation and testing (must comply with local and
national codes).
WARNING
IMPORTANT ELECTRICAL INSTRUCTIONS:
THE GRILL’S ROTISSERIE MOTOR AND LIGHTS ARE WIRED TO A SINGLE
THREE-PRONG (GROUNDING) PLUG FOR YOUR PROTECTION AGAINST SHOCK
HAZARD. THE GRILL SHOULD BE PLUGGED DIRECTLY INTO A PROPERLY
GROUNDED GFCI THREE-PRONG RECEPTACLE.