AS
SEMBLY
Step
5
Put Bolts(G) into the hole on the inner ring of Rotaty Ring(B),then screw
nuts(G) on the opposite side and tighten it
with Cross Srewdriver(N) and
Wrench(M)
.
Note the screw should enter from the large circle of the
tapered hole on Rotaty Ring to the small circle
Step
6
Turn the Rotaty Ring(B) so that the screw on Rotaty Ring is upward, and then
align holes in the outer ring of Rotaty Ring(B) with the hole on the Rotary Table(A).
Insert Bolts
(H)
into the holes and tighten them
with Cross Srewdriver(N)
.
G
G
H
H
H
G
G
G
G
B
A
N
N
6
