23
5.3 Advance Recommendation
Material
Advance Recommendation
General construction steels up to 850 N/mm²
0,8
– 1,0 m / min
Hardened steels over 850 N/mm²
0,75 m / min
Stainless and acid-proof steels up to 600 N/mm²
0,5 m / min
Steel casting up to 450 N/mm²
0,6 m / min
Cast iron up to 400 N/mm²
0,8
– 1,0 m / min
Aluminium (special indexable inserts required, available on
separate request)
0,4 m / min
5.4 Changing of the Indexable Inserts
Take care that the mains plug is drawn!
ATTENTION:
Changing or turning of indexable inserts only in cooled down condition!
a)
For the changing, turning resp., of the indexable inserts unscrew the two hexagon sockets
screws (13) which serve for the land width fixing.
b)
Lift cover off from motor.
Motorcover
c)
Bend up lock washer (17) on the groove nut (18).
d)
Fix milling head receiver by means of the 30 mm spanner included in the package.
e)
Unscrew and detach groove nut (18) by means of the sickle spanner included.
f)
Take up the lock washers (17).
g)
Take up the milling heads (40).
groove nut (18)
Lock washer (17)
Summary of Contents for SKF 63-15
Page 13: ...13 7 4 Beispiele für Rohreinstellungen bei Ø 140 200 250 390 mm ...
Page 64: ...64 ...
Page 69: ...69 ...