5. Set Up the outer flange on the spindle of blade Use the
Hex wrench to lock the shaft screw(B) And need push
the safety lever(A) to lock the shaft screw and fixthe
blade. Refer as Fig.5
Usage for bevel
1. Loose the special handle(A), move the base along
the angle plate from 0 to 45 (B)
(or the degree that you want) then tighten the
speical handle refer as Fig.6
LASER
The usage of laser
1. Power cord plug in power supply, turn on the laser switch
laser(B) will display as Fig.7 The laser is as guide
for cutting.
.
2. Laser indication is according to the angle plate's degree.
It's for user easy to cutting the angle. For example :
Angle plate indicate at 0 and laser will be 0 (B)
Angel plate indicate at 45 (C) Laser will be 45
(D) refer as Fig.8.
