ALIGNING THE LASER GUIDE LINE
DANGER:
Laser radiation.Avoid direct eye contact with light source.
WARNING:
Use of controls or adjustments or performance of procedures other than those specified
herein may resuit in hazardous radiation exposurs.When you adjust the laser please don’t tune on
switch.Fig.9 Otherwise starting the blade can be dangerous.
1. Adjusting the laser: Tighten or loose the (A)
for adjusting the laser indication direction.Adjusting
tooling: M2 Hex wrench (A) as Fig.10
Adjuting the laser indication direction to be same line as cutting line. Adjusting tooling: parallel
screwdriver(A) Fig.11.
3.
2.
Adjusting the laser and return zero by adjusting the guide ruler (A) and back base to zero
position(B). And the laser indication need to close U shape gap( C) , The U shape is close to guide
ruler as Fig.12.
Fig.10
Fig.9
Fig.11
Fig.12
