14
1 - Punching head
7 - Spacer sleeve
6 - Punching inserts (punch and die)
For the application of square punchers 92 x 92 mm the special hydraulic screw (Prod.-No.
01395) and the spacer sleeve (Prod.-No. 01396) is necessary. Screw the spacer sleeve tightly on
the die of the square punch 92 x 92 mm.
8
6
6 7
9
1
1 Punching head
6 Punching inserts:
punch 92 x 92 mm,
die 92 x 92 mm
7 Spacer sleeve, Prod. No. 01396
8 Counter nut
9 Special hydraulic screw, Prod. No. 01395
5. Press the operating switch and the punching process will be initiated. The punching process is finished as soon
as the punch has punched the sheet.
6. Press the vent lever located on the side so the punch will be vented and the piston moves backwards to his
initial position.
Vent lever
7. Unscrew and remove the die or correspondingly the counter nut and remove also the chad from the die.
6
7
1
Summary of Contents for 2070
Page 11: ...35 ...
Page 12: ...36 08 2013 ...
