ALFRA 2070, Operation Instructions Manual

Page: 3 / 12

11
Safety instructions
Wear safety goggles during drilling the guiding hole and during punching.
Keep hands out of the punching area during the punching process to avoid serious injuries.
Make sure that no other persons stay in front or close to the hydraulic punch during the
punching process to avoid serious injuries caused by splinters at material failure or incorrect
use of hydraulic punch.
Before changing the punching inserts it’s absolutely necessary to remove the battery from the
device to avoid unintended use.
While operating it can come to sparking which could set fire on flammable or explosive
materials.
At intensive operating the hydraulic punch can be damaged because of overheating.
The hydraulic punch must not be operated in damp locations.
The punching process can be interrupted at any time by releasing the operating switch. Then
the hydraulic punch can be vented by pressing the vent lever.
Specified conditions of use
The Battery Packed Compact Hydraulic Punch is destined to punch metal sheets.