25
dESign And Function
• The operation of the unit is divided into the parameter level, the operator level and the initialisation level.
• All operating parameters can be set at the
parameter level
.
• The basic functions of the display (depending on the software version) are available at the
user level
.
• Only basic actions such as sensor calibration or resetting the unit to default parameters (factory setting)
are carried out at the
initialisation level
.
• All entries are made exclusively via the 4 front keys or their key combinations; the display is via the
integrated LCD.
For various applications, the symbol for the unit of measurement can be changed by parameter (
P02
), e.g.
the "°" symbol for angle measurements.
The normalisation of the display value must be done manually via the multiplication factor (
P08
) and the
decimal point (
P03
).
For inch mode, the fraction display is also available.
1
Segments for numerical and text display
(incl. sign, decimal points, fraction display)
2
Symbols for unit of measurement or display mode
3
Symbols for active offsets 1...3 (offsets)
4
Battery status symbols
5
REF symbol: Device must be referenced
Summary of Contents for 03090
