alfen E-Socket, Quick Installation Manual, Page: 13 / 34

Quick start guide
Mounting the E-Socket on the Eve
Double pole
Preparing for installation
1 Use the proper accessory, mounting material or
kit for installation:
• Eve Double Pole FR (934459002)
• E-Socket support. (803873064-ICU).
• Four (4) pole mount screws. Included in the E-
Socket package content.
2 Mount the E-Socket support on the Eve Double
Pole FR.
• Fit the E-Socket support cutout in the slots on the
Eve Double Pole FR.
• Push the E-Socket Support in an upward direction
until the bracket mount screw aligns with the press
nut.
• Use the bracket mount screw to secure the E-
Socket support.
In this instruction the E-Socket will be mounted
on the right side. This instruction can also be
used for the left side.
3 Remove the four (4) philips head screws to
open the front cover with socket of the E-
Socket.
Leave the front cover with socket hanging.
Take care not to damage the cables.
4 Use the four (4) pole mount screws to mount
the E-Socket on the E-Socket support.
5 Use the four philips head screws to close the
front cover with socket.
Make sure the socket flap opens in an upward
direction.
Take care not to damage the cables; keep them
clear of the socket while closing so they do not
obstruct it.
6 The E-Socket mounted on the Eve Double pole.
7 Guide the E-Socket cable through the cut-out on
the E-Socket support before installing on the
Eve Double.
Please refer to page 17 on how to install the
E-socket on the charging station.
1
Bracket
mount
screw
1
Support
Duo-pole
1
Eve Single
Duo-pole
4
Pole mount
screw
1
2
3
4
5
6
7
12