ALF-SCK41TS
15
Command:
Type command in this box to be sent to control the display device,
and then click “Send”.
Relay 1~2:
The function is for projection screen control, and the HDBaseT
receiver which is connected to the switcher needs to have two relay ports. Click
“Manual”, the projection screen will either roll up or drop down, click “Manual”
again to stop process. After setting the auto stop time, click “Auto”, the projection
screen starts to roll up or drop down until the auto stop time is up.
6.1.3. Audio Control
Source:
Select audio source for audio outputs, HDMI and HDBaseT outputs.
Source Volume:
Volume bar, volume up, volume down and mute buttons for
source audio control.
Audio Out Delay:
Set the delay time of audio output to 0~150ms.
MIC:
Turn on or off microphone input.
MIC Volume:
Volume bar, volume up, volume down and mute buttons for
microphone audio control.
