ALF-MUH88TP-N
57
9. Firmware Upgrade
Please follow the below steps to upgrade firmware via the
FW
port on the rear panel:
1)
Prepare the latest two upgrade files and rename them as “08010000.APP” and
“08010000.APS” on PC.
2)
Power off the switcher and connect the
FW
port of the switcher to the PC with USB
cable.
3)
Power on the switcher, and then the PC will automatically detect a U-disk named of
“BOOTDISK”.
4)
Double-click the U-disk, a file named of “READY.TXT” should be shown.
5)
Directly copy one of two upgrade files (e.g., “08010000.APP”) to the “BOOTDISK”
U-disk.
6)
Reopen the U-disk to check the filename “READY.TXT”. If it automatically
becomes “SUCCESS.TXT”, the firmware was updated successfully, if not, the
firmware updating failed. The name of upgrade file should be confirmed again, and
then follow the above steps to re-update.
7)
Repeat step 5~6 to copy the other upgrade file (“08010000.APS”) to the
“BOOTDISK” U-disk.
8)
Remove the USB cable after firmware upgrade.
9)
After firmware upgrade, the switcher should be restored to factory default by
sending command.
