ALF-MUH88TP-N
11
5. Button Control
The ALF-MUH88TP-N matrix switcher can be controlled via the front panel buttons.
Whenever a command is accepted, the indicators of all the buttons pressed will blink
three times then indicators will go off. If the command fails, the indicators will go off
immediately without blinking.
5.1 Signal Switching
Switch an input to an output:
Operation: INPUT# + OUTPUT# + MENU/
↲
Example: Switch Input 1 to Output 2:
Press
INPUT 1
Press
OUTPUT 2
Press
to confirm.
Note:
In default status, 8 IR OUT ports correspond with 8HDMI INPUTS. When you
switch an HDMI input, the corresponding IR OUT will be switched synchronously.
Switch an input to several outputs:
Operation: INPUT# + OUTPUT# + OUTPUT# +… + MENU/
↲
Example: Switch Input 1 to Output 2, 3, and 4.
Press
INPUT 1
Press
OUTPUT 2
,
3
,
4
Press
to confirm.
SWITCH:1 ->
SWITCH:1 ->
2
SWITCH:1 ->
SWITCH:1 ->
2 3 4
