ALF-25X-4KCAM
- 31 -
After the version upgrade is completed, you need to restore the factory
default values
a, restore the factory default through web
configuration; b, restore the factory default value
through the menu;
c, remote control shortcut key *#6 restore factory default;
Choose one of the above three methods, in which the IP account and password of
“method a” are also restored to the default.
5)
Restore Factory Setting
Click "Restore Factory Defaults" button and choose “yes” or “no” on pop-up window,
then the device will restart automatically and restore factory setting.
6)
Reboot
Click "Reboot" button and choose “yes” or “no” on the pop-up window, then the
device will restart automatically.
4.1.8
Logout
Click "Logout"; and select "Yes" or "No" on pop-up window. If choose “Yes”, you will
exit the current page and return to the user login interface again.
5. Serial Port Communication and Control
The camera can be controlled through RS232/ RS485 interface; the RS232C serial parameters are as
follows:
Baud rate: 2400/ 4800/
9600(Prefered)
/ 115200 bits / sec; Start bit: 1; data bits: 8; Stop bit: 1; Parity:
None.
After power on, the camera performs a self-test. The self-test is finished when the camera zoom lens is
moved to the farthest and then back to the nearest position. If the camera has a saved 0/ Home preset, it
will revert to the ‘Home” position after initialization. At this point, the user can control the camera via the
serial commands.
