ALF-25X-4KCAM
26
Auto White Balance Sensitivity:
Sensitivity Auto white balance settings (default is low, high,
medium optional).
Red Gain:
Set the red gain, effective when it is manual (default 145, 0-255 optional).
Blue Gain:
Sets the Blue gain, effective when it is manual (default 56, 0-255 optional).
D
）
Image:
You can set brightness, contrast, sharpness, gamma curve, dynamic contrast, black
and white mode, horizontal flip, vertical flip, electronic zoom, ultra-low illumination
Brightness:
Set the brightness (default 7, 0-14 optional).
Contrast:
Set the contrast (default 7, 0-14 optional).
Sharpness:
Set the sharpness value (default 6, 0-15 optional).
Gamma:
Gamma
value setting (default 0.45, 0.50, 0.55, 0.63 optional).
Dynamic Contrast:
Set
dynamic contrast (default off, 1-8 optional)
BW Mode:
Set black and white mode (default color, black/white optional ).
Digital Zoom:
Set digital zoom (default off, on optional)
Lens Distortion Calibration:
Set image distortion (default off, on optional)
E
）
Noise Reduction:
2D noise reduction, 3D noise reduction and dynamic dead pixel
correction available.
2D Noise Reduction: Set 2D noise reduction level (default 3, 1-8 and off optional).
3D Noise Reduction: Set 3D noise reduction level (default 3, 1-8 and off optional).
Dynamic dead pixel correction: Set Dynamic dead pixel correction (default 4, 1-5 optional).
F
）
Style: Select image (Default, standard, brightness, clarity, and soft can be
set)
Refresh the page after changing above parameters in a, b, c, d, e, f to take effect.
5
）
Character Overlapping
Display Time & Date:
Yes/No
Display Title:
Yes/No
Time, Font and Color:
Default white, black, yellow, red and blue optional)
Title Font Color:
Default white, black, yellow, red, and blue optional)
