ALFAtron ALF-21E-SOFTCODEC, Manual

Page: 19 / 30

ALF-21E-SOFTCODEC
15
6.2.5 CEC/RS232 Function Setting
The ending mark of command is “<CR><LF>”.
Command Description
Command & Feedback
Example
#SET_SYNCACT_CEC 1
Enable the function of automatically
sending CEC commands.
When detecting video input signal or not
detecting any video signal, the switcher will
automatically send the corresponding CEC
command to control the display device.
@SYNCACT_CEC 1
#SET_SYNCACT_CEC 0
Disable the function of automatically
sending CEC commands.
@SYNCACT_CEC 0
#GET_SYNCACT_CEC
Get the function setting status of
automatically sending CEC commands.
@SYNCACT_CEC 1
#SET_SYNCACT_RS232
1
Enable the function of automatically
sending RS232 commands.
When detecting video input signal or not
detecting any video signal, the switcher will
automatically send the corresponding
RS232 command to control the display
device.
@SYNCACT_RS232 1
#SET_SYNCACT_RS232
0 Disable the function of automatically
sending RS232 commands.
@SYNCACT_RS232 0
#GET_SYNCACT_RS232
Get the function setting status of
automatically sending RS232 commands.
@SYNCACT_RS232 1
#SET_DTIME [PARAM1]:
[PARAM2]
When not detecting video input signal, set
the auto power-off time of display device to
[PARAM1]: [PARAM2]. The default time is
10 minutes.
[PARAM1]=0~30 minutes.
[PARAM2]=0~1800 seconds.
#SET_DTIME 1:30
@DTIME 1:30
#GET_DTIME
Get the auto power-off time of display
device.
@DTIME 30:0