17
Note:
The combination magnetic strip + GPS are possible if the track possesses one or two
magnetic strip(s) because the GPS, in this case, will be useful only to fill the number of
missing partial(s). Example : if the track possesses 1 magnetic strip, the system can add 2
GPS positions to obtain a total of 3 partials in the lap.
The magnetic strip will be the only reference for starting up the device and by consequence
the lap timing.
IMPORTANT :
For the option of ma GPS or only GPS, it’s necessary to go out on track
and record the GPS coordinates for configuration of the track layout.
Procedure to create a track MAG + GPS :
After editing the name,
In the menu « CHRONO », select MAG+GPS.
In the menu « NUMBER », configure the
number of magnetic strips installed on the
track.
In the menu « START », configure the
magnetic strip which will serve to start the
device.
In the menu « OBSCURITY », configure the
obscurity time (explained above).
Then, press the button corresponding to
the lower-left arrow, « Rec. Position GPS »
appears as selected.
Then, press on «OK» to prepare the device
for the recording of the GPS positions on
the track.
In case of the absence of the GPS signal, the
information « Wait for GPS Signal » displays
on the screen. In that case, go back to the
welcome page and wait for the reception of
a GPS signal. The number of satellites has
to be at least 6, then, redo the
programming.
Procedure to record magnetic strips and to record GPS positions on the track
