Copyright
2005 Alfano, S.A. Tous droits réservés.
9
SETUP
These menus consist in configuring various parameters of the Tyrecontrol :
01)
Choice of the unit Bar/PSI
« menu 01 »
(page 10)
02)
Choice of the vehicle
« menu 02 »
(page 10)
03)
Configuration of the sequence of the captures
« menu 03 »
(page 11)
04)
Calibration of the Pressure sensor
« menu 04 »
(page 13)
Procedure to reach the SETUP :
1)
The Tyrecontrol must be stopped.
2)
Press the central button
during minimum 5 seconds, the Tyrecontrol starts in
the first menu SETUP :
« Choice of the unit Bar/PSI ».
Procedure to browse the menus SETUP :
Press the button
or
.
Procedure to leave the mode SETUP :
1)
After the menu
« Calibration of the Pressure sensor »
,
2)
Press the central button
on « EXIT », the Tyrecontrol starts in its normal
working on mode « RECORD ».
