Alfano A-187 User Manual Download Page 14

 

 

 

 

 

 

Copyright 

 2005 Alfano, S.A. Tous droits réservés. 

14 

Warranty conditions 

 

All our devices have been subject to in-depth factory tests and are covered by a 24-month 
warranty  against  manufacturing  defects.  The  warranty  comes  into  force  from  the  date  of 
purchase.  The  date  of  purchase  is  the  date  stated  on  the  invoice/till  receipt  given  by  the 
seller at the time of sale. The manufacturer undertakes to repair and replace free of charge 
any parts which have a manufacturing defect during the warranty period.

 

 

Any defects which 

cannot be clearly attributed to the material or the manufacturer will be examined at one of 
our  approved  after-sales  service  centres  and  invoiced  depending  on  the  results.  The 
warranty  does  not  apply  in  cases  of  device  opening,  accidental  damage,  negligence  or 
misuse,  inappropriate  or  incorrect  installation  or  failure  to  perform  the  installation  in 
accordance  with  the  instructions  contained  in  the  attention  note  and  in  events  not 
associated with the rules of operation and use of the device.

 

 

The warranty will become null 

and  void  in  cases  of  repair  or  handling  carried  out  by  unauthorised  third  parties. 
Intervention  under  warranty  does  not  entitle  to  the  device  replacement  or  warranty 
extension.  Intervention  under  warranty  is  carried  out  at  one  of  our  approved  after-sales 
service  centres  or  at  our  head  office.

 

 

In  the  latter  case,  the  item  must  reach  our 

establishment  postage  paid,  that  is,  transport  costs  shall  be  paid  by  the  user.

 

 

The 

manufacturer  undertakes  no  responsibility  for  any  damage  to  persons  or  goods  caused  by 
poor installation or incorrect use of the device. 

 
 

 

Product modifications 

 

Alfano  SA

  applies  a  method  of  ongoing  development.  Consequently, 

Alfano  SA

  reserves 

the  right  to  make  changes  and  improvements  to  any  product  described  in  this  document 
without prior notice. 

 
 

 

Damages and responsibilities 

 

The products are used under the customer’s sole direction and responsibility and therefore 
damages  suffered  or  caused  by  the  products  shall  be  borne  by  the  customer.  No 
compensation  will  be  paid  for  removal  of  enjoyment,  and  ALFANO  cannot  be  held 
responsible  for  the  direct  or  indirect  consequences  of  their  use  or  rendering  useless. 
ALFANO’s obligations are duty of care and not a performance obligation. 
 
 

 

Disposal 

 

The  device  must  be  disposed  of  with  respect  for  environment.  The  chronometer  and  its 
accessories contain many plastic parts. When the chronometer or one of its accessories no 
longer  functions,  they  must  be  dealt  with  according  to  the  laws  of  the  country.

 

 

Used 

batteries must be disposed of in accordance with the regulations in force in your country.  
 
 
 
 

Summary of Contents for A-187
















Reviews: