13
Example of wiring of three sensors (selection of 5 to 8 works):
2.1.2 Selection through serial command
The
CSQ-Visual
supports serial communication through which it is possible to select a work
remotely. Using serial communication, it is possible to select up to 250 works. To be able to
operate it is necessary to enable slow serial communication and set the
Automatic selection code
.
For the use of serial communication, see the relative manual.
2.2 Configuring the use of the phases
It is sometimes necessary to perform different machining process on the same piece, for instance,
different gears are fitted onto a drive shaft one after the other: hence the need to analyse all the
different machining phases.
The
CSQ-Visual
is able to manage up to four phases for each single process. The choice of the
phase may take place automatically, in succession or through the digital inputs of the instrument.
For every work process is it possible to decide whether to exclude one or more phases.
To enable a function for several phases, it is necessary to indicate the maximum number of phases
supported. To do this, select the
TOOLS > ADVANCED OPTIONS > MACHINE TYPE > WORKS
PHASES CHANNELS
menu and change the
Number of phases
value. As well as indicating the
number of phases, it is necessary to indicate the way to behave, changing the
Automatic selection
code
.
If the maximum number of phases is changed, it will be necessary to cancel all the works created
previously:
Figure 2