1
R 100%
9
G 100%
21
R 100%
B 100%
17
B 100%
25(1)
R 100%
5
R 100%
G 100%
13
G 100%
B 100%
: Short press get 24 kinds static RGB color.
: For dynamic RGB mode, adjust speed,
short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation,
namely change current static RGB color to mixed white slowly,
short press 11 levels, long press 1-6s for continuous 256 levels adjustment
.
: Short press run next dynamic mode, long press 2s run mode-cycle.
: Short press recall the scene, long press 2s save
current state into S1/ S2
.
4 zone recall or save synchronously.
:
For dual color or RGB+CCT(W W / CW ) lamp, adjust color temperature by W W / CW channel,
short press 11 levels, long press adjust W W +CW b
rightness continuously
.
For RGB lamp, adjust color temperature by mix R/ G/ B channel,11 levels.
1
Warm White
WW 100%
CW 0%
11
Cool White
WW 0%
CW 100%
6
Natural White
WW 100%
CW 100%
1
Warm White
R 100%
G 50%
B 0%
6
Natural White
R 100%
G 100%
B 100%
11
Cool White
R 0%
G 50%
B 100%
For RGBW lamp, adjust color temperature by adjust W channel brightness,11 levels.
1
W 0%
11
W 100%
6
W 50%
CCT
RGB
S
1
S
2
S afety information
1
. Read all instructions carefully before you begin this installation.
2
. W hen installing battery, pay attention to the battery positive and negative polarity.
A long time w ithout the remote control, remove the battery.
W hen remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4
. Gently handle remote, bew are of falling.
5. For indoor and dry location use only.
AFR-T5, AFR-T10 Touch Wheel RF Remote Controller
User Manual Ver 1.0.2
www.alfaled.sk
Page 4