Match Remote Control (two match ways)
Use the controller’s Match key
Match
:
Short press match key, immediately press on/ off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Power Restart
Match
:
Switch off the power, then switch on power again,
immediately short press on/ off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete
:
Switch off the power, then switch on power again,
immediately short press on/ off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete
:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/ delete w ays. Tw o options are offered for selection:
AFR-T5, AFR-T10 Touch Wheel RF Remote Controller
●
AFR-T5 1 zone RGB+CCT remote
: Adjust RGB or color temperature brightness,
short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
CCT RGB
R
G
W
B
S
1
S
2
:Turn on/ off light
.
:Touch to change RGB color or color temperature
.
Press RGB or CCT key to switch between RGB wheel and CCT wheel.
:
Adjust color temperature by W W / CW channel,
short press 11 levels, long press adjust W W +CW brightness continuously.
1
Warm White
WW 100%
CW 0%
11
Cool White
WW 0%
CW 100%
6
Natural White
WW 100%
CW 100%
CCT
Operation
●
W hen turn on light, the indicator display blue. when turn off light, the indicator display red.
●
W hen touch the color wheel
,
the indicator will display the same color.
●
W hen press or touch operation is invalid (If the light is off), the indicator display red.
●
To extend battery life
,
no touch or press key operation after a few seconds
,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
To x the remo t e, thr ee opt ions ar e of fer ed for sel ect ion:
Option 1: stuck the remote on any metal surfaces directly.
Option 2:
fi
x the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
Key function
User Manual Ver 1.0.2
www.alfaled.sk
Page 2