Alfa Romeo Giulia Quadrifoglio 2017, Owner'S Manual

Page: 166 / 268

System Activation/
Deactivation
The system is activated/deactivated by
pushing the button located on the end
of the multifunction lever.
Note: When the engine is started, the
system maintains the operating mode
that was selected when it was turned
OFF.
Activation Conditions
Once turned on, the system becomes
active only if the following conditions
are met:
The vehicle speed is above 37 mph
(60 km/h).
The lane limit lines are visible at least
on one side.
There are suitable visibility conditions.
The road is straight or with wide
radius bends.
A suitable distance is kept from the
vehicle in front.
The turn signal is not active.
Symbols And Messages
On The Display
The Lane Departure Warning system
advises the driver when the vehicle
leaves the driving lane by showing
symbols and messages on the
instrument cluster display.
When the system is active and the lane
limits have not been detected, the
display shows a grey vehicle icon with
two grey lines
Exiting a lane with detection of a
single limit
When the system is active and only, for
example, the left lane limit has been
detected, the detected lane illuminates
in white on the display; the system is
ready to provide visual warnings on the
display in the event of unintentional
exiting of the lane (turn signal not
activated) to the left.
07226S0001EM
Lane Departure Warning System
Activation/Deactivation Button
07226S0002EM
Vehicle Changing Lanes
07226S0007EM
Lane Limits Not Detected
07226S0003EM
Left Lane Limit Detected
164
ST
AR
TING
AND
OPERA
TING