115
a = Advanced Efficiency (ECO driving
mode for maximum fuel savings).
RACE = track race driving mode (RACE
mode is Quadrifolgio exclusive).
= adjusts the calibration of the suspen
-
sions (if equipped).
Unlike the other modes, the RACE position is
unstable, therefore, by rotating the selector
to RACE, it will return to its initial position
"d".
On the instrument panel display, the
different modes are characterized by
different colors:
Dynamic - Red
Natural - Blue
Advanced Efficiency - Green
RACE - Yellow (RACE mode is Quadrifolgio
exclusive)
Mode Display
The different driving modes are graphically
different from the color of the frames and the
contents only on the "performance" screens.
Driving Modes
"Dynamic" Mode
Activation/Deactivation
It is activated by rotating the selector to the
letter "d", the displays light up in red.
To deactivate the Dynamic mode, move the
selector to "n", Natural mode.
"Natural" Mode
Activation/Deactivation
It is activated by rotating the selector to the
letter "n", the displays light up in blue.
To deactivate the Natural mode, move the
selector to another mode ("d" or "a").
"Advanced Efficiency" Mode
Activation/Deactivation
It is activated by rotating the selector to the
letter "a", the displays light up in green.
To deactivate the Advanced Efficiency mode,
move the selector to "n", Natural mode.
“RACE” Mode — If Equipped
Activation/Deactivation
It is activated by rotating the selector to posi
-
tion "RACE", the displays light up in yellow.
NOTE:
It is recommended to activate this mode at
the track.
To deactivate the “RACE” mode, take the
selector to position "RACE" again and the
system will be set to "d", Dynamic mode.
NOTE:
When the engine is next started, the
"Advanced Efficiency", "Dynamic" and
"Natural" mode selected previously is
retained. The system will reactivate in
"Advanced Efficiency", "Dynamic" or
"Natural" mode, depending on which
mode was selected before the engine was
stopped.
When the engine is next started, the
"RACE" mode selected previously is not
retained. The system will reactivate in
"Dynamic" mode.
It is not possible to go directly from
"Dynamic" mode to "Advanced Efficiency"
mode and vice versa. You must always
activate the “Natural” mode first and then
select the other mode.
2019_ALFA_GIULIA_COMBINED_UG_USA.book Page 115
